USB Relay Controller - Eight Channel (FTDI) 12V
-
Code:U8CR
-
Weight:0.228 Kgs
A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC. USB Relay controller allows a PC to control a single external device using simple RS232 commands. Relay is fully powered from the USB bus. Free test software.
Estimated Shipping
starts at
€18.00
The general purpose of the Relay board is connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC.
Features:
• Fully assembled and tested.
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• Can be used with LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE
Model:
U8CR
Complete including:
One USB 8 channel controller
Required power:
12VDC / 1000 mA.
Dimensions:
KMTronic_8Relay_Dimension.pdf
USB to UART interface:
FT232RL (FTDI)
Drivers:
http://www.ftdichip.com/Drivers/VCP.htm
Drivers are available to work with the following operating systems:
All Windows Systems, Linux, Mac OS X, Mac OS 9, Mac OS 8, Windows CE.NET (Version 4.2 and greater)
Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600
Commands:
FIRST chanel commands:
OFF command : FF 01 00 (HEX) or 255 1 0 (DEC)
ON command : FF 01 01 (HEX) or 255 1 1 (DEC)
...
...
...
EIGHT chanel commands:
OFF command : FF 08 00 (HEX) or 255 8 0 (DEC)
ON command : FF 08 01 (HEX) or 255 8 1 (DEC)
Software:
info.KMtronic.com/USB-Relay-Test-Software.html
More information:
info.KMtronic.com/USB-Eight-Channel-Relay-Controller.html
Software examples:
info.KMtronic.com/USB-RS232-RS485-Relays.html