USB Relay Controller - Two Channels

A general purpose USB Relay controller for connection to a PC's USB port using VCP (Virtual COM port). Control devices using your PC.  USB Relay controller allows a PC to control a single external device using simple RS232 commands. Relay is fully powered from the USB bus. Free test software.

Features:
• Fully assembled and tested.
• Fully powered from USB
• For 12V/24V DC 15A or 120V/220V AC at 10A max.
• Can be used with  LabVIEW, ProfiLab, DAQFactory, TestPoint, DASYLab, VEE 

Model:
U2CR

Complete including:
- One USB Two relay controller

Dimensions:
100 mm / 62 mm / 26 mm

Drivers:
http://www.ftdichip.com/Drivers/VCP.htm

Drivers are available to work with the following operating systems:
All Windows Systems, Linux, Mac OS X, Mac OS 9, Mac OS 8, Windows CE.NET (Version 4.2 and greater)

Communication Parameters:
8 Data, 1 Stop, No Parity
Baud rate : 9600

Commands:
- FIRST relay commands:
    "FF 01 00" - OFF command
    "FF 01 01" - ON command
- SECOND relay commands:
   "FF 02 00" - OFF command
   "FF 02 01" - ON command

Software:
info.KMtronic.com/kmtronic-usb-relay-test-software.html

More information:
info.KMtronic.com/USB-Relay-Controller-Two-Channels.html

Software examples:
info.KMtronic.com/USB-RS232-RS485-Relays.html