UDP LAN Two channels Relay Ethernet IP Controller - BOX

NOTE:
UDP Relay board is developed for software control.
For control via Web Browser - Windows Explorer, Mozilla, Google Chrome... we recommend WEB version.

A general purpose LAN Relay controller.

Features:
• Fully assembled and tested.
• Each relay has an LED to indicate when it is operated.
• Relay outputs can be used to turn ON/OFF lights, motors and other devices.

Model:
UD2CRB

Complete including:
- One LAN Two relay controller

Required power:
12VDC / 1000 mA.

Specifications:
Relays have Normally Open (NO) and Normally Closed (NC) Contacts
each capable of switching max:
- 12VDC/15A
- 24VDC/15A
- 125VAC/15A
- 250VAC/10A

Dimensions:
110 mm / 55 mm / 25 mm

Default Settings:
IP address: 192.168.1.199
Webserver Port: 80 (for initial configuration with username/password)
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
UDP Port: 12345
Username: admin
Password: admin

Reset to Default Settings:
Hold Reset button for 10 seconds

Installation:
https://info.kmtronic.com/km-udp-two-relay-box.html

UDP Commands:
FF0000 - Status Read command (ASCII encoding)

FF0100 - Relay 1 OFF command (ASCII encoding)
FF0101 - Relay 1 ON command (ASCII encoding)

FF0200 - Relay 2 OFF command (ASCII encoding)
FF0201 - Relay 2 ON command (ASCII encoding)

FFE000 - All relays OFF command (ASCII encoding)
FFE003 - All relays ON command (ASCII encoding)



UDP Test Software example including source code (C#):

KMTronic UDP Test Software.zip

KMTronic UDP Test Software Source Code.zip

Configuration:

More information:
info.KMtronic.com/LAN-2-Channels-UDP-Relay.html


Software examples:
info.KMtronic.com/LAN-Relays.html